Well, I was thinking about how to reduce the "wire mesh" from the Signal Generator. One option is to interface the 20x4 LCD using an I2C expander. I can use the MCP23017 16I/O or a PCF8574 from NXP. Decision is to go ahead with the PCF8574.
Next target is to improve the Keypad handling. Here also I can use the same chip to handle a 4x4 matrix keyboard
There are libraries available for I2C LCD and Keypad targeting the PCF8574.
Next experiment is to evaluate the libraries before making any change to the code...:)
Next target is to improve the Keypad handling. Here also I can use the same chip to handle a 4x4 matrix keyboard
There are libraries available for I2C LCD and Keypad targeting the PCF8574.
Next experiment is to evaluate the libraries before making any change to the code...:)
No comments:
New comments are not allowed.